1- Structure: AZ series pulp pump is a
centrifugal pump of horizontal, single stage, single suction, cantilever design. The pump cover is fixed on the frame and is clamped tightly by pump casing and frame.
2- Application: Chemical industry,
pulp and paper,
sugar industry,
metallurgy,
fertilizer,
salt mining industry,
environment protection
3- Usage: These pumps are disgned to
transfer the pulp below 8% density,
fibers less than 50mm and other liquid with the solid content below 30%, conform to ISO5199 standard.
4- Material: Wetted parts comply to
ASTM standard, others as follows,
Cast stainless steel, Cast titanium, Cast nickel
5- Standard conditions at site: Relative humidity during continuous operation
max. 90%
Ambient temperature
max. 40ºC, min.4ºC
Permissible altitude up to 1000m above sea level
6- Outlet pressure: The pump outlet pressure at the outlet nozzle depends on: The
pump inlet pressure, The
maxmium total head of the selected impeller diameter.
7- Pressure and temperature limitations: The maxmium casing operating pressure pall wc of the casing and the casing cover depends on the operating temperature.
6- Operating data
| Min. Flow Rate |
6m³/h |
| Max. Flow Rate |
1200m³/h |
| Min. Head |
5m |
| Max. Head |
125m |
| Min. Operating Temperature |
-40ºC |
| Max. Operating Temperature |
175ºC |
Detailed pictures
Audited Supplier 
){kind=link}