| Customization: | Available |
|---|---|
| Warranty: | 2 Years |
| Max.Head: | 50-80m |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
These pumps are designed to transfer slurry or produced from flue gas desulphurization process, or corrosive liquid containing hard impurities. With two-phase flow hydraulic design, it can couple intelligent monitoring system, and either automatic control or incoporating with DCS is possible. Its technical requirment conform to ISO5199 standard.
1. Wetted parts comply to ASTM standard, common material as follows: Cast stainless steel, Cast titanium
1. Relative humidity during continous operation max.90%
2. Ambient temperature max.40ºC, min.4ºC
3. Permissible altitude up to 1000m above sea level
The permissible operating range of centrifugal pumps depends on:
1. Impeller shape
2. Speed
3. Vibration
4. Medium charateristics
5. Bearing and shaft load
6. Heat dissipation-particularly with regard to insulated volute casings and the corrosion resistance of materials
7. The net positive suction head of the working condition and NPSH
The pump outlet pressure at the outlet nozzle depends on:
1. The pump inlet pressure
2. The maximum total head of the selected impeller diameter
3. The density of the medium to be pumped
| Min. Flow Rate | 320m³/h |
| Max. Flow Rate | 14000m³/h |
| Min. Head | 6m |
| Max. Head | 65m |
| Min. Operating Temperature | -20ºC |
| Max. Operating Temperature | 175ºC |
){kind=link}